CLT11003A2
Automation Optical Switches
MEMS-based optical circuit switch with 320 ports, sub-30 ns latency, and low insertion loss for automated single-mode test lab connectivity.
PLT1008A
Automation Optical Switches
Nonblocking all-optical matrix switches from 8×8 to 384×384 ports with low insertion loss, dark fiber switching, and SDN interfaces for lab or network use.
TLS1011A
Automation Optical Switches
Robotic optical patch panel scaling from 48 to over 10,000 fibers with ultra-low insertion loss and single-mode or multimode fiber support.
S8702A
RF Development Solutions
RF Automation Toolset provides automated and speed-optimized RF Transmitter and Receiver tests for 5G NR, LTE, WLAN, NB-NTN, NR-NTN and C-V2X based on 3GPP-defined test specifications.
S8714A
RF Development Solutions
Simplify RF verification of 5G NR, LTE, RedCap, NB-NTN, NR-NTN, and Wi-Fi® devices with a solution designed specifically for fast RF testing
SL1064B
Battery Test Solutions
The Measurement and Control Module SL1064B is a rack-mount gateway for CAN- and LIN-buses with up to 6 channels. It can be used as a configurable communication interface between Scienlab Battery Test Systems and devices under test (especially their BMS) as well as additional components using CAN communication.
SL1065B
Battery Test Solutions
The Scienlab Measurement & Control Module SL1065B – Analog Input is a rack-mount measuring and control module for measuring voltages and currents (e.g. single cell voltages in battery modules or packs). It features fully galvanically isolated measurement inputs and records all measured values synchronously and with common time stamps by Precision Time Protocol (PTP).
SL1066B
Battery Test Solutions
The Measurement and Control Module SL1066B is a rack-mount measuring and control module that provides adjustable voltage outputs for BMS and DUT power supply and floating relay contacts to simulate e.g. vehicle specific terminals 15, 30 and 31.
SL1067B
Battery Test Solutions
The Measurement & Control Module SL1067B is a rack-mount measurement module for measuring voltage input ±10 V with 16 channels. The module can be used either as a stand-alone device or as extension for a Scienlab Battery Test System.