Request for Quote

Home

>

>

Device Location Test Solution

Request a Qoute

Collection:

Device Location Test Solution

Automated Location Technology Testing for 5G, LTE, and Wi-Fi Devices

Device Location Test Solution is part of the Keysight (formerly Spirent) 8100 Mobile Device Test System portfolio.

Model:

LN2C50A045

  • Publication Number
N/A

Mobile Device Test System Location Technology Solution

Test A-GNSS, OTDOA, ECID, and Wi-Fi positioning on 5G, LTE, and Wi-Fi devices with the 8100 Location Technology Solution for conformance and performance.

Technology 5G NR (NSA/SA), LTE, WCDMA, GSM, CDMA, WiFi, CAT-M1, BLE
Supported standards 3GPP TS37.571-1 (Sections 7–13), 3GPP TS37.571-2, GCF, PTCRB, CCSA, OMA SUPL 2.0, OMA LPPe ETS

Accelerate Device Location Testing Across the Full Lifecycle

Validating location performance on multi-mode wireless devices requires testing across multiple satellite constellations, positioning protocols, and air interfaces — from conducted A-GNSS conformance to radiated over-the-air (OTA) certification. The Keysight Device Location Test Solution addresses this challenge with a scalable, automated platform that consolidates location technology testing for 5G NR, LTE, Wi-Fi, and legacy networks into one system. It covers standards-based conformance to 3rd Generation Partnership Project (3GPP), Global Certification Forum (GCF), PTCRB, and Cellular Telecommunications and Internet Association (CTIA) requirements, operator acceptance testing, and R&D performance analysis — with conducted and OTA test modes managed from one user interface.

Multi-Constellation GNSS Coverage

Test Assisted Global Navigation Satellite System (A-GNSS) positioning across GPS, GLONASS, BeiDou, Galileo, QZSS, and NAVIC constellations with multi-frequency support including GPS L5.

Conducted and OTA Test Modes

Run both conducted-mode and radiated OTA location tests from a single platform, covering CTIA and China Communications Standards Association (CCSA) OTA certification requirements.

5G and Multi-Mode Device Support

Address 5G NR standalone and non-standalone architectures alongside LTE, WCDMA, GSM, CDMA, Wi-Fi, Cat M1, and Bluetooth Low Energy (BLE) device testing needs.

Standards and Operator Readiness

Meet 3GPP, GCF, PTCRB, CTIA, and CCSA conformance requirements and validate against carrier-specific acceptance test plans from major global operators.

Supported standards 3GPP TS37.571-1 (Sections 7–13), 3GPP TS37.571-2, GCF, PTCRB, CCSA, OMA SUPL 2.0, OMA LPPe ETS, CTIA More…
Technology 5G NR (NSA/SA), LTE, WCDMA, GSM, CDMA, WiFi, CAT-M1, BLE, 5G NR (NSA/SA, RedCap), 5G NR FDD/TDD More…

Test A-GNSS, OTDOA, ECID, and Wi-Fi positioning on 5G, LTE, and Wi-Fi devices with the 8100 Location Technology Solution for conformance and performance.

Mobile Device Test System Location Technology Solution

Test A-GNSS, OTDOA, ECID, and Wi-Fi positioning on 5G, LTE, and Wi-Fi devices with the 8100 Location Technology Solution for conformance and performance.

Technology 5G NR (NSA/SA), LTE, WCDMA, GSM, CDMA, WiFi, CAT-M1, BLE
Supported standards 3GPP TS37.571-1 (Sections 7–13), 3GPP TS37.571-2, GCF, PTCRB, CCSA, OMA SUPL 2.0, OMA LPPe ETS

Highlights

The Mobile Device Test System Location Technology Solution delivers comprehensive performance and conformance testing for location-equipped wireless devices across 5G, LTE, and Wi-Fi networks using multiple A-GNSS technologies in a single system.

  • Multi-constellation A-GNSS support
  • Tests GPS (L1 and L5), GLONASS, BeiDou, and Galileo satellite constellations simultaneously
  • Supports A-GNSS, Observed Time Difference of Arrival (OTDOA), Enhanced Cell ID (ECID), and Wi-Fi measurement for positioning
  • Covers Secure User Plane Location (SUPL) 2.0, LTE Positioning Protocol (LPP), LPP Extensions (LPPe), Radio Resource Location Protocol (RRLP), and IS-801-1
  • 5G and multi-mode device testing
  • Addresses 5G NR in both non-standalone (NSA) and standalone (SA) modes, 4G LTE, WCDMA, GSM, CDMA, Wi-Fi, Cat M1, and Bluetooth Low Energy (BLE)
  • Supports 3GPP Rel 15 and Rel 16 location features, including Emergency Fallback, Voice over New Radio (VoNR), downlink/uplink OTDOA, angle of arrival (AoA), and multi-round trip time (RTT)
  • Tests 4G/5G coexistence to evaluate intermodulation and harmonic interference effects on location performance
  • Conformance and operator acceptance
  • Validated for GCF, PTCRB, CTIA, CCSA, and OMA test specifications
  • Supports VoLTE E911 functional tests, E911 calling over Wi-Fi, and barometric pressure z-axis testing for FCC and carrier requirements
  • Conducted and over-the-air (OTA) testing
  • Controls conducted-mode and radiated OTA testing from a single user interface
  • Integrates with anechoic test chambers; compliant with current LTE OTA CTIA test requirements
  • Hybrid indoor positioning
  • Emulates up to 32 Wi-Fi access points via the SR5750 multi-access point (AP) instrument for Wi-Fi protocol and performance tests
  • Supports indoor positioning methods including Wi-Fi, Bluetooth, and barometric pressure via LPPe
  • Productivity
  • Parallel device testing executes test cases on two devices simultaneously to reduce overall test time
  • A-GNSS record and playback capability brings field testing conditions into the lab with controlled, repeatable methodology

Service and Support

KeysightCare

Innovate at speed with curated support plans and prioritized response and turn-around times.

Financial Alternatives

Get predictable, lease-based subscriptions and full lifecycle management solutions—so you reach your business goals faster.

Keysight Support Portal

Experience elevated service as a KeysightCare subscriber to get committed technical response and more.

Calibration

Ensure your test system performs to specification and meets local and global standards.

Education

Make measurements quickly with in-house, instructor-led training, and eLearning.

Software Download Center

Download Keysight software or update your software to the newest version.

Related Products

Product Image

EDU34450A

Essential Benchtop Digital Multimeters

The EDU34450A is a bench DMM with dual-display 5.5-digit-resolution digital multimeter with up to 110 readings/s measuring rate for speed-critical tests.

View Details

Product Image

EDU190A

Instrument Stacking Kit

The EDU190A is an anodized metal frame that enables one EDU series instrument to stack on each other. It can be securely attached to the wall or lab bench.

View Details

Product Image

DM34460A

Advanced Benchtop Digital Multimeters

The Keysight DM34460A series 6.5-digit dual-display digital multimeter uses Truevolt technology to perform accurate hardware design validation and debugging.

View Details

Product Image

DM34461A

Advanced Benchtop Digital Multimeters

The Keysight DM34461A 6.5-digit dual-display digital multimeter uses Truevolt technology to perform accurate hardware design validation and debugging.

View Details

Request for quote